Rules centre
The rules, in the open
Every candidate is graded under the same published rules. Task standards are versioned (current: v1) and may be refined as the first cohorts complete their assessments — the rules attached to your drawn task are the rules you are graded against.
The two-part theory gate
Before any practical, you pass two theory gates. Theory here is a prerequisite check, not exam preparation: it covers only the safety rules and theory the hands-on task itself involves.
- Common Core — written once, valid for 2 years, and counts for every module. Pass mark: 70% overall and at least 90% on the safety questions. Fail it and you can retake after a 3-day cooldown.
- Module theory — a short exam attached to each module application, taken while your application is open. Same pass marks and cooldown.
- Oral prompts — during the practical you narrate and answer task-tied prompts out loud; that performance is scored inside the Preparation dimension of the rubric.
The practical: one take, on the clock
- When you start, the system assigns your task and displays a 4-digit dynamic passcode unique to the attempt.
- In the first 10 seconds, hold your photo ID and a handwritten note of the passcode up to the camera together. The passcode note stays at the edge of the frame for the whole recording.
- One continuous take — no edits, no pauses, no retakes. Record at 720p or better, framing you, your hands, the workpiece and any gauge readings.
- The deadline is the task's standard duration plus a 15-minute upload buffer. An attempt that is not submitted in time expires and the application returns to the theory-passed stage.
- All tasks are performed on practice boards or training panels. B1 wiring is verified on low-voltage simulation or de-energized continuity — never on mains power.
Grading: five dimensions, one veto
An assessor scores each dimension from 0 to 100. The weighted total decides the level:
| Dimension | Weight | What it covers |
|---|---|---|
| Quality | 40% | The finished result meets the task standard and tolerances. |
| Safety | 25% | Safe sequence, PPE, proving and isolation discipline. |
| Craftsmanship | 15% | Workmanship: neatness, care of material, professional finish. |
| Speed | 10% | Completing within the standard duration, without rushing unsafely. |
| Preparation | 10% | Setup, tool readiness, drawing reading and the oral prompts. |
- Levels: total ≥ 90 and Quality ≥ 90 → L3; total ≥ 75 → L2; total ≥ 60 → L1; below 60 → not passed.
- Safety veto: each task publishes its veto points (for example, working without a lock in A2). Triggering one fails the attempt outright — no score and no assessor override can reverse a veto.
- Hard tolerances: some modules carry hard-fail measurements — in C1, a key dimension out by more than 1/4″ fails the module regardless of the total.
- Diagnostic, not just a verdict: if you do not pass, your result page shows the five dimension scores and the assessor's notes, so you know exactly what to fix.
- Re-apply cooldown: after a failed practical, the same module re-opens for application after 7 days.
- Independence: an assessor can never review their own attempt, and every review is recorded.
Stamps, freshness and verification
- A passing stamp gets a serial number in the form TSP-<module>-<year>-<sequence> and shows two axes: the level (L1/L2/L3) and the verification method (DIY self-recorded in this first release; proctored methods arrive in a later phase).
- Freshness: stamps age. Safety modules stay fresh 2 years, conduit craft 3 years, drawing and theory-based modules 5 years. Past its freshness window a stamp shows as Refresh suggested on the verify page — it is not hidden, and a revoked stamp stays publicly visible as revoked.
- Employers verify any serial on the verify page without an account. Scores and video are never public.
- Sharing: a stamp holder can mint a time-limited share link and send it to a specific employer; the link expires and shows only the stamps chosen.
What a stamp does — and does not — mean
A stamp means: on a recorded, standardized task, under a published rubric, this person demonstrated the stated level of hands-on skill, and an assessor graded the evidence. It does not mean the holder is licensed, certified, or endorsed by any government body, and it is not a guarantee of job performance. Employers remain responsible for licence verification and their own hiring decisions.
Privacy and your video
- Raw assessment video is accessible only to assessors and platform administrators for grading and audit.
- Raw video is destroyed 14 days after submission (the appeal window). Grades, scores and stamp records are kept.
- The public verify page shows identity, module, level, method and stamp state only — never scores, feedback or video.
Fees
The basic DIY verification service — registration, theory gates, practical assessment, grading and your stamp — is free, and stays free. Optional paid services may be introduced in a later phase; they will be announced here before they exist, and nothing about the free basic service depends on them.
